FIXUROOF :Pull Tester for deckplates

  • Full set of accessories for testing fasteners
  • Display peak force
  • Designed to test deck-plate fasteners
5 days


Calibrated with the order


Ship in less than one week


One year warranty

The Fixuroof portable pull-tester is an accurate unit, designed for testing in the field the pull-out force for base ply fastener. Easily determine whether the mechanical fastener provides sufficient resistance to static uplift force to meet the wind load requirements.

The Fixuroof pull-tester is specially designed for the following domains:

  • Proof the good installation of base sheets and roof covers
  • Determine the quality and uniformity of the installed materials
  • Validate the integrity of the deck

The Fixuroof pull-tester is an essential tool in roofing industries, where it is important to ensure the good installation of the base ply fastener.

This dedicated kit comes with a full range of accessories:

  • A Pull tester (with its calibrated gauge 1000lb, analog or digital)
  • 2 x heavy duty deck plate lifter foot LFH3500 (shank: 7/8” – Head: 3.5”)

How it works:
Insert a sample of the base sheet into a 12” x 12” jig with a 8” diameter opening in the center. A fastener is then placed through the base sheet in the center of the opening in the jig. The fastener is secured to the upper jaw of the pull-tester and the frame of the tester on the deck. The force is exerted in a direct line parallel to the shank of the fastener by using the hand crank until failure occurs.


  • Structural Concrete
  • Roofing Inspection

Can be used in accordance with Standards: Dade County PA 105-95 A

Data sheet

17.00 lb
1,000 lb
Certificate of calibration
Maximum travel
5 in
Base opening
6 in
Carrying case

Specific References

You might also like