Recommanded fastener tester for screw type fasteners
Posted by
Sep 26, 2018
Target the right one
0 Comments
For insulation and membrane attachment to wood, steel and strutural concrete roof deck
| Fastener type | Material | Capacity | Pull tester |
| Thread Point Fastener | Steel ( 20 Ga to 24 Ga) | 750lb | EXTRACTOR |
| Thread Point Fastener | Plywood (1/2" to 3/4") | 750lb | EXTRACTOR |
| Thread Point Fastener | Wood (1" to 1-1/2" penetration) | 1000lb | EXTRACTOR |
| Drill Point/Self Drill | Steel (12 Ga to 16 Ga) | 2000lb | EXTRACTOR |
| Drill Point/Self Drill | Steel (18 Ga to 24 Ga) | 750lb | EXTRACTOR |
| Drill Point/Self Drill | Insulated Panet to Steel ( 12 Ga to 16 Ga) | 2000lb | EXTRACTOR |
| For insulation attachment to wood and steel roof decks | |||
| Fastener type | Material | Capacity | Pull tester |
| Heavy Duty Drill Screw | Steel ( 13 Ga to 18 Ga) | 2000lb | EXTRACTOR |
| Heavy Duty Drill Screw | Steel ( 20 Ga to 24 Ga) | 1000lb | EXTRACTOR |
| Heavy Duty Drill Screw | Plywood (1/2" to 3/4") | 750lb | EXTRACTOR |
| Heavy Duty Drill Screw | 3000 PSI Concrete (1" Embedment) | 1000lb | EXTRACTOR |
| For attachment of insulation and membrane roof covers in a corrosive environment | |||
| Fastener type | Material | Capacity | Pull tester |
| Stainless Steel self-drill screw | Steel ( 12 Ga to 16 Ga) | 1500lb | EXTRACTOR |
| Stainless Steel self-drill screw | Steel ( 24 Ga to 18 Ga) | 1000lb | EXTRACTOR |
| For membrane attachment to wood and steel roof rack | |||
| Fastener type | Material | Capacity | Pull tester |
| Extra Heavy Duty | Steel ( 22 Ga to 18 Ga) | 2000lb | EXTRACTOR |
| Tapping screws (Carbon steel) | 3600 PSI Concrete (3/4" to 1" Embedment) | 1000lb | EXTRACTOR |
| Tapping screws (Carbon steel) | 3600 PSI Concrete (1-1/4" to 1-1/2" Embedment) | 2000lb | EXTRACTOR |
| Tapping screws (Carbon steel) | 8" Standard Concrete Block (1-1/4" to 1-1/2" Embedment) | 1500lb | EXTRACTOR |
| Tapping screws (Carbon steel) | Face Brick | 1500lb | EXTRACTOR |
| For lightweight roof decks, concrete, gypsum, tectum, for insulation and membrane attachment | |||
| Fastener type | Material | Capacity | Pull tester |
| Tectum & LT.WT | Tectum Deck (1-1/2" Embedment) | 400lb | EXTRACTOR |
| Tectum & LT.WT | Tectum Deck (2" to 2-1/2" Embedment) | 750lb | EXTRACTOR |
| Tectum & LT.WT | Tectum Deck (2-1/2" Embedment) | 500lb | EXTRACTOR |
| Tectum & LT.WT | Poured Gypsum (2" Embedment) | 750lb | EXTRACTOR |
| For retro-fit roofing systems to penetrate heavy-gauge purlin | |||
| Fastener type | Material | Capacity | Pull tester |
| Hex Head Purlin | Steel (18 Ga to 16 Ga) | 750lb | EXTRACTOR |
| Hex Head Purlin | Steel (14 Ga to 12 Ga) | 2000lb | EXTRACTOR |
| For fastening termination bar at wall terminations | |||
| Fastener type | Material | Capacity | Pull tester |
| Termination bar | 2000psi Concrete (1" to 1-1/4" Embedment) | 1000lb | EXTRACTOR |
| Termination bar | 2000psi Concrete (1-3/8" to 1-1/2" Embedment) | 1500lb | EXTRACTOR |
| Clip | Steel (12 Ga to 16 Ga) | 2000lb | EXTRACTOR |