No products in the cart.
Posted by
Technical information
0 Comments
views (7482)
COM-TEN has specific packages, including pull testers and relevant lifter feet suitable for all types of industry specs, and can provide customized kit assemblies, including frame, gauge and lifter feet, if none of the standard packages are suitable for to your specific needs.
All COM-TEN pull...
Posted by
Technical information
0 Comments
views (5177)
the aim of this article is to promote ‘measurement awareness.’ It also gives an insight into the other areas affecting effective construction measurement such as calibration.
Posted by
Technical information
0 Comments
views (5137)
In order for a measurement to be done effectively, the first thing to be taken into consideration is the choice of the measuring tool used.
Use the right tool fit for its intended purpose.
There are three steps to ensuring that a pull tester is fit for its intended purpose.
Posted by
Technical information
0 Comments
views (5468)
Each roof section with a different elevation, deck or insulation type shall be considered independently and tested separately.
Posted by
Technical information
0 Comments
views (5312)
Modern building science is a construct in the history of building innovation. It has arisen following assessment of the building failures encountered when attempts to innovate were made without applying its principles.
Posted by
Technical information
0 Comments
views (1356)
This purpose of this article is to inform you why pull testers are used with particular reference to their use in the construction industry and to provide relevant links.
As their name suggests, pull testers are used to carry out pull tests.
They are portable digital or analog force gauges and...
Posted by
Technical information
0 Comments
views (1306)
The measurement of the bonding strength of coatings, with the Adhor tester
Posted by
Technical information
0 Comments
views (1268)
The TILE TESTER portable force gauge is an accurate unit, designed for testing the pulling force of installed roof tiles.
Posted by
Technical information
0 Comments
views (1742)
The ABAA (Air Barrier Association of America) requires adhesion testing to be performed in the field of all air barrier material that use adhesion as their means of attachment to the wall.
Posted by
Technical information
0 Comments
views (1048)
Inform you on who operates pull-testers with particular reference to who uses them the construction industry and to provide relevant links