Pull out test on tiles with ComTen TILETESTER
Posted by
Sep 26, 2018
Technical information
0 Comments
The TILE TESTER portable force gauge is an accurate unit, designed for testing the pulling force of installed roof tiles.
Easily perform your quality test with our full equipped Tile tester and prevent from loose tiles.
The Tile Tester is specially designed for the following domains:
- Perform a static test uplift load on tiles
- Measure the withdraw load to validate a safe installation of tiles
- Test the uplift strength of in place roofing tiles
 |
The tile is grabbed by a tile edge lifter foot which is attached to force gauge by a mounting chain. A direct tensile load is applied by lifting up the handle of the force gauge. The gauge displays and registers the maximum applied load. |