Made in Florida
Recommanded fastener tester for screw type fasteners
For insulation and membrane attachment to wood, steel and strutural concrete roof deck
For insulation attachment to wood and steel roof decks
For attachment of insulation and membrane roof covers in a corrosive environment
For membrane attachment to wood and steel roof rack
For lightweight roof decks, concrete, gypsum, tectum, for insulation and membrane attachment
For retro-fit roofing systems to penetrate heavy-gauge purlin
For fastening termination bar at wall terminations
| Fastener type | Material | Capacity | Pull tester |
| Thread Point Fastener | Steel ( 20 Ga to 24 Ga) | 750lb | EXTRACTOR |
| Thread Point Fastener | Plywood (1/2" to 3/4") | 750lb | EXTRACTOR |
| Thread Point Fastener | Wood (1" to 1-1/2" penetration) | 1000lb | EXTRACTOR |
| Drill Point/Self Drill | Steel (12 Ga to 16 Ga) | 2000lb | EXTRACTOR |
| Drill Point/Self Drill | Steel (18 Ga to 24 Ga) | 750lb | EXTRACTOR |
| Drill Point/Self Drill | Insulated Panet to Steel ( 12 Ga to 16 Ga) | 2000lb | EXTRACTOR |
For insulation attachment to wood and steel roof decks
| Fastener type | Material | Capacity | Pull tester |
| Heavy Duty Drill Screw | Steel ( 13 Ga to 18 Ga) | 2000lb | EXTRACTOR |
| Heavy Duty Drill Screw | Steel ( 20 Ga to 24 Ga) | 1000lb | EXTRACTOR |
| Heavy Duty Drill Screw | Plywood (1/2" to 3/4") | 750lb | EXTRACTOR |
| Heavy Duty Drill Screw | 3000 PSI Concrete (1" Embedment) | 1000lb | EXTRACTOR |
For attachment of insulation and membrane roof covers in a corrosive environment
| Fastener type | Material | Capacity | Pull tester |
| Stainless Steel self-drill screw | Steel ( 12 Ga to 16 Ga) | 1500lb | EXTRACTOR |
| Stainless Steel self-drill screw | Steel ( 24 Ga to 18 Ga) | 1000lb | EXTRACTOR |
For membrane attachment to wood and steel roof rack
| Fastener type | Material | Capacity | Pull tester |
| Extra Heavy Duty | Steel ( 22 Ga to 18 Ga) | 2000lb | EXTRACTOR |
| Tapping screws (Carbon steel) | 3600 PSI Concrete (3/4" to 1" Embedment) | 1000lb | EXTRACTOR |
| Tapping screws (Carbon steel) | 3600 PSI Concrete (1-1/4" to 1-1/2" Embedment) | 2000lb | EXTRACTOR |
| Tapping screws (Carbon steel) | 8" Standard Concrete Block (1-1/4" to 1-1/2" Embedment) | 1500lb | EXTRACTOR |
| Tapping screws (Carbon steel) | Face Brick | 1500lb | EXTRACTOR |
For lightweight roof decks, concrete, gypsum, tectum, for insulation and membrane attachment
| Fastener type | Material | Capacity | Pull tester |
| Tectum & LT.WT | Tectum Deck (1-1/2" Embedment) | 400lb | EXTRACTOR |
| Tectum & LT.WT | Tectum Deck (2" to 2-1/2" Embedment) | 750lb | EXTRACTOR |
| Tectum & LT.WT | Tectum Deck (2-1/2" Embedment) | 500lb | EXTRACTOR |
| Tectum & LT.WT | Poured Gypsum (2" Embedment) | 750lb | EXTRACTOR |
For retro-fit roofing systems to penetrate heavy-gauge purlin
| Fastener type | Material | Capacity | Pull tester |
| Hex Head Purlin | Steel (18 Ga to 16 Ga) | 750lb | EXTRACTOR |
| Hex Head Purlin | Steel (14 Ga to 12 Ga) | 2000lb | EXTRACTOR |
For fastening termination bar at wall terminations
| Fastener type | Material | Capacity | Pull tester |
| Termination bar | 2000psi Concrete (1" to 1-1/4" Embedment) | 1000lb | EXTRACTOR |
| Termination bar | 2000psi Concrete (1-3/8" to 1-1/2" Embedment) | 1500lb | EXTRACTOR |
| Clip | Steel (12 Ga to 16 Ga) | 2000lb | EXTRACTOR |
Visit Com-Ten
Choose the right pull tester
You don't know what his the best pull tester for you?
Click on the above image to see our solutions sorted by fastener type.
|
Click on the above image to see our solutions sorted by fastener type.